You're setting up a powersports maintenance shop and you need a reliable way to raise a dirt bike, ATV, or motorcycle for chain work, oil changes, and wheel service. Scissor lifts are a common choice because they tuck away when not in use. The hard part is that four similar-looking stands in this class make it tough to tell what you're actually getting. The real differences are deck width, lift height, and whether the stand can roll.
Quick Take
All four use a hand-crank scissor mechanism. Three of them sit at the same price point, and the fourth, a LEADZM model, costs a little more. The three wide-deck stands share a similar layout and top out at 14.5 inches; the LEADZM tops out at 13.25 inches. The price spread between the low and high ends is $4.80.
| Lift | Listed Price | Relative Price |
|---|---|---|
| Motorcycle Lift Jack 1100LBS Scissor Hoist Stand for ATV Dirt Bike 9'' Wide Deck | $52.99 | |
| 1100LBS Motorcycle Lift Scissor Jack 9'' Wide Deck Hoist Stand for ATV Dirt Bike | $52.99 | |
| 1100 LBS Motorcycle Lift Scissor Jack Wide Deck Hoist Stand for ATV Dirt Bike | $52.99 | |
| 1100 LB Dirt Bike ATV Scissor Jack Center Lift Removable Crank Repair Stand HD | $57.79 |
Decision Matrix
- Motorcycle Lift Jack 1100LBS Scissor Hoist Stand - Pick this 9'' Wide Deck model when you want a straightforward scissor hoist for ATV and dirt bike work.
- 1100LBS Motorcycle Lift Scissor Jack 9'' Wide Deck Hoist Stand - Pick this variant if the 1100LBS and 9'' Wide Deck wording is the one you recognize.
- 1100 LBS Motorcycle Lift Scissor Jack Wide Deck Hoist Stand - Pick this one if you want the widest deck of the three similarly priced stands.
- LEADZM 1100 LB Dirt Bike ATV Scissor Jack Center Lift Removable Crank Repair Stand HD - Pick this one if you want a rolling center lift.
Motorcycle Lift Jack 1100LBS Scissor Hoist Stand for ATV Dirt Bike 9'' Wide Deck
This is the stand to start with if you want a wide platform that fits a typical dirt bike or ATV without extra hardware. The 9-inch-wide deck is paired with a scissor frame that gives you a generous working range, and the textured rubber pad helps keep the frame in place. The catch: it has no casters, so you'll need to position the lift before the bike is on it, and you'll be turning the crank by hand. For a straightforward shop stand, that's a reasonable trade-off.
1100LBS Motorcycle Lift Scissor Jack 9'' Wide Deck Hoist Stand for ATV Dirt Bike
If the exact wording '1100LBS Motorcycle Lift Scissor Jack' is what caught your eye, this variant matches it. It uses the same 14.4 x 9 inch platform and the same lift geometry as the other wide-deck stands, with a height range that tops out in the same neighborhood. What you give up: there's no different mechanism here, so you're choosing this for the name as much as the design. As long as you know it delivers the same wide-deck scissor lift, it's a fine alternative.
1100 LBS Motorcycle Lift Scissor Jack Wide Deck Hoist Stand for ATV Dirt Bike
If you want the widest deck among the three similarly priced stands, this is the one to pick. The platform measures 14.6 x 9 inches, a bit more surface than the other two wide-deck models, which can help when you're lining up a bike with a wider lower frame. The 14.6-inch depth gives you a touch more front-to-back support while keeping the stand compact. The trade-off is that it remains a fixed scissor design, so you gain a little platform area without gaining any mobility. It's the roomiest of the trio for the same price.
LEADZM 1100 LB Dirt Bike ATV Scissor Jack Center Lift Removable Crank Repair Stand HD
The LEADZM model breaks from the others by adding four casters and a removable crank, so you can roll it into place, raise the machine, and then take the crank off while you work. Its adjustment range goes from 3.25 to 13.25 inches, which is slightly shorter at the top end than the wide-deck group. Rubber padding protects the bike's frame, and the steel construction is in line with the rest of this class. The thing you give up is top height; if you regularly need more than about 13 inches of clearance, the other three stands will get you higher.
Final Recommendation by Use Case
For most powersports maintenance work, the $52.99 wide-deck group is the sensible default; the 14.6-inch platform version from that group gives you the most deck surface for the same price. If you'd rather roll the lift around the shop and want to remove the crank during a job, the LEADZM at $57.79 is the stand to choose, and the $4.80 price difference buys that extra mobility. If you simply want the lowest-cost entry point, the Motorcycle Lift Jack 1100LBS Scissor Hoist Stand at $52.99 covers the basics without added bulk.
