Rev & Trail

Quad One Oil Filter vs Wheel Stud Nut Kit: Which ATV Replacement Part Fits Your Job?

Two Quad One ATV replacement parts at very different prices: a widely compatible oil filter and a brass front-wheel stud nut kit for Polaris Ranger RZR 800. Here's how to choose.

Last updated Aug 17, 2026

Two Quad One replacement parts from different corners of the ATV world often end up on the same parts list: an oil filter for Polaris, Honda, and Kawasaki ATVs and a wheel stud nut kit for the Polaris Ranger RZR 800. They aren't interchangeable, but they both come as New Quad One parts and both serve real maintenance or repair jobs. The decision comes down to which job you're actually doing: routine engine maintenance or front-wheel hardware replacement.

Quick verdict

If your ATV falls within the #1300 oil filter fitment range and you're planning maintenance, choose the QUAD ONE ATV REPLACEMENT PARTS #1300 Oil Filter. If you're working on the front wheel of a Polaris Ranger RZR 800 and need a brass stud nut kit, choose the Quad One 9201-1 Wheel Stud Nut Kit. Both are new Quad One parts, and the listed prices are $11.99 and $19.00, a $7.01 spread that reflects different jobs rather than competing versions of the same part.

At a glance

ProductListed PriceKey detailsPrice bar
QUAD ONE ATV REPLACEMENT PARTS #1300 Oil FilterUSD 11.99New oil filter; compatible with Polaris, Honda, Kawasaki ATVs; part #1300
Quad One 9201-1 Wheel Stud Nut Kit Polaris Ranger RZR 800 ATV Replacement PartsUSD 19.00New brass front-wheel stud nut kit; pack of 4; part #9201-1

Where each product wins

  • The oil filter wins on scope and routine maintenance: it pairs a broad three-brand compatibility note with the lower listed price.
  • The wheel stud kit wins on targeted repair: it is specifically tied to Polaris Ranger RZR 800 and gives you brass front-wheel nuts in a four-piece set.

Product notes

QUAD ONE ATV REPLACEMENT PARTS #1300 Oil Filter

QUAD ONE ATV REPLACEMENT PARTS #1300 Oil Filter

The #1300 oil filter is the maintenance-oriented part in this pair, and its attributes point to broad ATV coverage across Polaris, Honda, and Kawasaki. For a routine oil change on a compatible model, the #1300 part number is the direct way to match the filter to your engine. The long Honda fitment description gives you a concrete model-by-model checklist, and the New condition removes any doubt about the part state. The trade-off is that a filter only does one job. If your shopping list also includes wheel studs or other hardware, this part won't cover that task. Because the compatibility statement is broad, you need to match your specific ATV model and year against the #1300 fitment list rather than assuming every Polaris, Honda, or Kawasaki uses this filter. For engine maintenance on a compatible machine, the part number is the sensible starting point.

Quad One 9201-1 Wheel Stud Nut Kit Polaris Ranger RZR 800 ATV Replacement Parts

Quad One 9201-1 Wheel Stud Nut Kit Polaris Ranger RZR 800 ATV Replacement Parts

The 9201-1 wheel stud nut kit zeroes in on one specific repair. The title names Polaris Ranger RZR 800, while the attributes add front-wheel placement, brass material, and a four-piece pack. If you have that utility ATV in front of you and the old nuts are worn, this kit is the appropriate match without adding extra pieces you don't need. The brass material and four-count are concrete details that make the kit feel intentional for a front-wheel job. On the limitation side, the specificity cuts both ways. The title points to one vehicle platform, the placement is front-wheel only, and the pack contains exactly four nuts. If your task involves a different axle position, another vehicle, or more than four studs, this kit is not a one-stop hardware solution. For a direct RZR 800 front-wheel stud nut replacement, the part number and pack contents keep it a clean choice.

Final choice by use case

  • Need a fresh oil filter for a Polaris, Honda, or Kawasaki ATV that matches the #1300 fitment range? Go with the QUAD ONE ATV REPLACEMENT PARTS #1300 Oil Filter and use the part number as your fitment check.
  • Need replacement front-wheel stud nuts on a Polaris Ranger RZR 800? Go with the Quad One 9201-1 Wheel Stud Nut Kit and use the four-nut brass pack as your hardware check.

The right pick depends entirely on the repair bay, so choose the part that matches the job rather than the lower or higher listed price. Both are new Quad One parts, and neither one is a substitute for the other.

Products in this article
QUAD ONE ATV REPLACEMENT PARTS #1300 Oil FilterUSD 11.99View on eBayQuad One 9201-1 Wheel Stud Nut Kit Polaris Ranger RZR 800 ATV Replacement PartsUSD 19.00View on eBay
QUAD ONE ATV REPLACEMENT PARTS #1300 Oil FilterUSD 11.99View on eBayQuad One 9201-1 Wheel Stud Nut Kit Polaris Ranger RZR 800 ATV Replacement PartsUSD 19.00View on eBay

You may also like

Finding more guides for you…